Home / Residential / Concrete RV Pads
Residential · San Antonio, TX
Concrete RV Pads in San Antonio
Texas is RV country, and San Antonio is one of the most RV-friendly cities in the state. A properly built RV pad gets your motorhome, fifth-wheel, or boat trailer off the dirt and onto a surface engineered to actually carry the weight..
RV Pads San Antonio
Texas is RV country, and San Antonio is one of the most RV-friendly cities in the state. A properly built RV pad gets your motorhome, fifth-wheel, or boat trailer off the dirt and onto a surface engineered to actually carry the weight.
RV pads aren't just thicker driveways
A typical residential driveway is poured 4 inches thick with light rebar — fine for a passenger car. A loaded Class A motorhome can weigh 30,000 to 45,000 pounds with concentrated point loads at the tires.
Our standard RV pad specifications
We size and reinforce every RV pad to handle real-world Texas RV weights.
Standard RV pad build:
- 6-inch minimum thickness (8-inch for the heaviest rigs)
- Compacted aggregate sub-base, 4-6 inch depth
- #4 rebar on 18″ grid + chairs
- 4,000 PSI concrete mix
- Engineered control joint layout
- Slope for proper drainage away from the rig
Common RV pad sizes
We’ll help you size your pad based on the actual rig you own.
Common pad dimensions:
- 10×30 — single travel trailer or small Class C
- 12×40 — typical fifth-wheel or Class A
- 14×45 — large Class A motorhome with slide-outs
- 16×50 — Class A plus tow vehicle parked alongside
- Double-wide pads for RV + boat or RV + truck
Hookups, drainage, and accessories
We can integrate utility hookups, dump-station access, and even an integrated apron or driveway extension into your RV pad project.
Free RV pad estimates in San Antonio
Call 210-405-7176 for a free RV pad estimate. We typically complete a residential RV pad in 4 to 7 working days depending on size, weather, and demo.
FREE INSTANT QUOTE!
*Plus FREE bonus coupon*
FAQs
Concrete RV Pads FAQs
How much does a concrete RV pad cost in San Antonio?
Most residential RV pads run between $10 and $16 per square foot installed. A standard 14×40 pad with proper specs is typically $5,500 to $9,000.
How thick should my RV pad be?
Six inches is our minimum for any RV pad. For the heaviest Class A motorhomes we recommend eight inches with heavier rebar.
How long until I can park my RV on the new pad?
Concrete typically reaches full design strength at 28 days. We recommend waiting the full 28 days before parking a loaded motorhome.
Do I need a permit for an RV pad in San Antonio?
Most private RV pads on your own property don’t require a city permit, but HOA or neighborhood deed restrictions may apply.
Can you pour an RV pad next to my existing driveway?
Absolutely — this is a common configuration. We’ll tie the new pad into your existing driveway with a proper isolation joint.
Can you handle dirt work and site prep for a sloped lot?
Yes. Most San Antonio Hill Country lots have some slope, and we handle the excavation, cut-and-fill, and base preparation.
Ready to talk about your rv pads san antonio project?
Call us today to schedule a free, no-pressure estimate. We serve San Antonio and the surrounding Texas Hill Country — same standards on every job.
Call now · free estimate
210-405-7176